北京城市绿化的时空动态分析

城市绿化覆盖是城市生态系统的重要组成部分,合理的绿化率和绿化布局可以改善城市环境,提高城市人居适宜性。研究中将2005、2010、2015年北京市土地利用（LUC）数据中的城市居民用地作为城区范围,应用Landsat 5、GF-1影像数据和MODIS产品,利用支持向量机的监督分类方法,提取了2005、2010、2015年的北京市城市绿化覆盖数据,并获取了同期的植被指数（NDVI）数据;继而以城市绿化覆盖率、绿化覆盖均匀度和植被指数为评价指标,在公里栅格和行政区2个尺度上探讨了北京市城市绿化覆盖的空间分布格局和时间变化动态特征。研究表明：① 3个指标在空间和时间2个维度、区县和栅格2个尺度上都表现一致。这反映北京市过去10年中,在绿化面积增加的同时,绿化的空间布局得到优化改善,绿化的质量得到提高。② 2005-2015年,北京市城市绿化覆盖面积由518.93 km² 增加到1405.54 km²,绿化覆盖率由39.9%增加到49.13%,绿化覆盖均匀度由0.598增加到0.653,植被指数由0.42增加至0.5。③ 北京市城市绿化建设存在明显的时空差异。中心城区绿化建设缓慢,成效不明显;重大绿化建设成果主要集中在城市边缘地区和远郊区县。城市绿化改善过程主要发生在2005-2010年。     

黄河口水下底坡微地貌及其成因探讨

高分辨率的回声测深、旁侧声纳及浅地层剖面记录首次直观地揭示了黄河口水下底坡上发育有大量形态不同的微地貌类型。据其形态特征和规模的差异,将它们划分为平滑海底、凹坑与洼地、冲沟、残留岗丘及扰动复合海底等五种类型。这些微地貌分布在不同水深条件下的不同水下三角洲单元上,并存在着相互联系和相互转化。黄河口海域特殊的沉积环境和复杂的动力条件是导致水下底坡微地貌形成发育的主要机制。     

中国海岸带高分辨率遥感系统技术基础研究

基于海岸带作为经济高度发展的地带,特别是我国常规海岸带调查已不能满足海岸带经济发展和现代化管理的基本要求,着重从大量高分辨率遥感数据的组织和管理、快速准确的空间定位系统、特征级的影像融合以及海岸带特征提取等算法,共同构成海岸带高分辨率遥感数据处理及分析方法作为系统的技术基础,并通过与此相匹配的海岸带遥感分类系统及其综合制图等方法研究,支撑起海岸带遥感资源调查先进的技术构架,为实现我国海岸带现代化管理奠定理论和技术基础.     

High-resolution sediment echosounding off Peru: Late Quaternary depositional sequences and sedimentary structures of a current-dominated shelf

About 6000 km of both bathymetric and high-resolution acoustic profiles were acquired on the shelf and upper slope offshore Peru between 9° S and 14° S. Two new sediment echosounder systems – SEL-96 and SES-2000DS – provided details of the sedimentary structures of the Quaternary sequences within the Sechura-Salaverry, Huacho and Pisco Basins. To a great extent, the poleward undercurrent determines the distribution of sediments. The undercurrent has generated numerous erosional unconformities, it has winnowed hardgrounds and has created mudwaves common between 250 m and 400 m water depth. Distinct subbottom reflectors within sedimentary units represent hiatuses due to periods of intensified winnowing or non-deposition. Erosional unconformities usually marked by pronounced reflectors suggest shifts of the undercurrent system related to climatic changes and eustatic variations of sea level. On a larger scale, the stacked prograding depositional sequences reflect the sea-level cycles of the Middle Pleistocene to the Holocene. Based on the stratigraphy of our piston cores and that of Ocean Drilling Program (ODP) Site 680, the depositional sequences limited by extended unconformities were assigned to oxygen isotope stages 1 to 7. Other sedimentary structures are small straight channels that were conduits for downslope sediment transport. Deformed sediments associated with synsedimentary normal faults result from creep movements indicating beginning slope failure.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

Simulation of Formation and Spreading of Salinity Minimum Associated with NPIW Using a High-Resolution Model

A series of numerical experiments were conducted with a high-resolution (eddy-permitting) North Pacific model to simulate the formation and spreading of the salinity minimum associated with the North Pacific Intermediate Water (NPIW). It was found that two factors are required to simulate a realistic configuration of the salinity minimum: a realistic wind stress field and small-scale disturbances. The NCEP reanalyzed wind stress data lead to better results than the Hellerman and Rosenstein wind stress data, due to the closer location of the simulated Oyashio and Kuroshio at the western boundary. Small-scale disturbances formed by relaxing computational diffusivity included in the advection scheme promote the large-scale isopycnal mixing between the Oyashio and Kuroshio waters, simulating a realistic configuration of the salinity minimum. A detailed analysis of the Oyashio water transport was carried out on the final three-year data of the experiment with reduced computational diffusivity. Simulated transport of the Kuroshio Extension in the intermediate layer is generally smaller than the observed value, while those of the Oyashio and the flow at the subarctic front are comparable to the observed levels. In the Oyashio-Kuroshio interfrontal zone the zonally integrated southward transport of the Oyashio water (140–155°E) is borne by the eddy activity, though the time-mean flow reveals the existence of a coastal Oyashio intrusion. In the eastern part (155°E–180°) the zonally integrated transport of the Oyashio water indicates a southward peak at the southern edge of the Kuroshio Extension, which corresponds to the branching of the recirculating flow from the Kuroshio Extension. This revised version was published online in July 2006 with corrections to the Cover Date.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

城市框架数据的更新模式及应用研究

分析了利用竣工测量数据、VRS技术及高分辨率影像更新城市框架数据三种模式的可行性,给出了适合青岛地区框架数据的更新方案.     

基于GIS的铁路地质环境多源信息管理研究——以西南地区某铁路为例

从构建铁路地质环境多源信息管理系统的必要性人手,针对目前铁路工程地质勘察与地质灾害空间多源信息管理的不足,以ArcGIS软件为应用平台,以VBA为开发工具,采用定制ArcMap的方法进行二次开发。对铁路地质环境涉及的基本内容,以及如何构建基于GIS的铁路地质环境多源信息管理系统等作了探讨。     

多源遥感影像数据的融合方法探讨

在分析和总结多源遥感影像数据融合的基础上,探讨了多源遥感影像数据融合的层次、模型、结构及其特点.归纳总结了多源遥感影像数据融合方法,目的是提高多光谱影像分辨率的同时保持色调不变,从另一个角度理解为在已知低分辨率多光谱影像和高分辨率全色影像的基础上,模拟生成高分辨率多光谱影像.本文介绍了遥感影像融合技术,系统阐述了几种常见的遥感影像融合方法及其应用.